Other
$25.00
- Includes stainless steel bolts
- 40mm fits 200mm Front and 180mm Rear Rotors
$4.59
- Allows the use of two separate cables running from detangler to brake for more precise adjustment and better feel
- Attaches to rear cable guide and routes two cables around seat post
$6.00
- Soft foam grip donuts prevent thumb blisters from riding gloveless
- Intended for use with flanged BMX grips to prevent rubbing and irritation
$8.00
- Economy level forged alloy seat post clamps for BMX and cruiser bikes with 1" / 25.4mm seat posts
- Clamp Size: 25.4mm
- Material: Alloy
$11.99
- Alloy top cap with hollow bolt to allow for brake cable pass-through
- ED black durable finish
- Size: 1-1/8"
$38.00
- Aluminum cups w/ steel hardware
- Converts a non-threaded 68mm American BB shell to use an English-threaded Euro BB
- Shell: 68mm
- Interface: American
- Spindle Type: Euro
- Cup Material: Alloy
- Weight: 104g
$14.99 - $19.99
Key features:
- Blendr works with this simple formula: Stem + Base + Mount. Add accessory.
- Bases for use with Bontrager Pro Blendr stem
- Add any XXX accessory mount (sold seperately) for an elegant, integrated look
$2.00
Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.
$10.99
40-Series Bearing
- Compatible with 110-, 40-, and 10-Series headsets
$12.00
Cane Creek ZN40-Bearing 41.8mm 45 x 45 Zinc, Each from Cane Creek.
$12.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters.
- Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series
- Integral mold seals keep out the elements
$18.00
40-Series Bearing
- Compatible with 110-, 40-, and 10-Series headsets
$21.99
40-Series Bearing
- Compatible with 110-, 40-, and 10-Series headsets
$25.00
40-Series Bearing
- Compatible with 110-, 40-, and 10-Series headsets
$30.00
40-Series Bearing
- Compatible with 110-, 40-, and 10-Series headsets
$15.99 - $31.00
These baseplates are the foundation that keeps Chris King headsets turning with legendary smoothness. Manufactured from high-quality stainless steel or titanium, Chris King makes replacement baseplates for all standard sizes and a number of ingenious solutions for those that need something a little special to make their headset work.
- Engineered and manufactured in Portland, Oregon USA
- High-quality stainless steel and titanium baseplates available for all standard Chris King headset sizes
- Titanium baseplates are available in 1-inch and 1 1/8-inch sizes only
- Devolution baseplates are a stainless steel solution that allow King headsets to adapt to a wide variety of steerer tube sizes
- King Stainless Steel baseplates are available in undersized and oversized versions for irregular steerer tube sizes
- 30.0mm ID/40.5mm OD for post-April 1995 1-1/8" Headsets
- 30.0mm ID/44.0mm OD for pre- April 1995 1-1/8" Headsets
$0.14
Parts for repair and maintenance of DT Swiss hubs.
- DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings
$2.70
Parts for repair and maintenance of DT Swiss hubs.
- DT Swiss Spacer Sleeve - 10.1mm, for 3-pawl
$5.00
Parts for repair and maintenance of DT Swiss hubs.
- DT Swiss Star Ratchet Spring
$11.00
Service your DT Swiss star ratchet hubs and wheels with DT Swiss Ratchet and Kits.
- DT Swiss 370/Onyx Service Kit: 2 pawls, spring and grease
$14.50
Bearings for maintaining and rebuilding DT Swiss hubs.
- DT Swiss 6805 Bearing
$17.99
Dimension Seatpost Clamps
- Diameters: 28.6mm, 30.0mm, 31.8mm, 35.0mm
- Weight: 34g
$42.00 - $44.99
Dimension Steerer Extender adds 2 to 3-1/4" height to steerer.
- Extender clamps to steerer; stem clamps to extender
- Adds 2 to 3-1/4-inch height to threadless steerer
- Includes top cap and long bolt
- 40mm of threadless steerer is required for proper installation
- Do not stack steerer extenders; no more than one steerer extender recommended per bike
- WARNING: Dimension Steerer Extender is not recommended for use on forks with carbon fiber steerers
$7.99
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity
$11.00
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity
Page 1 of 9
Next page